Washing Machine Installation Dubai Service Call 0568770106

Have you just bought a washing machine or are you planning to do so? Wondering how to install it? What is the safety clamp on a washing machine? How to unleash her? Is it easy to connect the water supply? Where is the best place to install? How to make the electrical connection of a washing machine in complete safety?
Do not panic ! PLUMBERINDUBAI COMPANY helps you see more clearly and assists you in the installation of your washing machine.

We hire Expert & Professional Technician, So, feel free to contact us, You can contact us via WhatsApp

Installing a washing machine can be done simply, in five steps:

Unclamping : consists of removing the transport protections
Positioning : place the washing machine close to its environment of use
Water connection: connect the washing machine to the water inlet and outlet
Connection to electricity : connect the washing machine to a suitable electrical supply
First wash : test the machine for first use

All these steps will allow you to remember nothing and start using your new washing machine with confidence. And if you have any doubts, don’t hesitate to contact us, if we can help you, we will!

Unlock a washing machine to start its installation

Unclamping a washing machine is mandatory before use, using the machine without removing its protective flanges can damage it.

Unclamping the washing machine can be done as soon as it is unpacked. This involves removing the washing machine’s protective screws, in particular the one (s) used to hold the drum in a fixed position in order to prevent it from moving during transport of the machine. These screws, generally located at the back or under the washing machine, can hold transport rods, these are also to be taken out of the machine to release the drum.
Other transport brackets may be present depending on the model, to stall the motor for example, so it is recommended to follow the information provided by the manufacturer of the washing machine to ensure that the unclamping is carried out correctly during installation. .
Once the washing machine is unchecked, make sure that the holes for the protection screws are filled with the accessories provided.

washing machine installation in a suitable environment of use

The washing machine must be installed in a room protected from frost and positioned in a stable place away from humidity.

Some washing machines are equipped with a roller device to facilitate their movement, it must be locked once the machine is placed.
When placing it, it is recommended to check that the feet are resting correctly on the floor and that the washing machine is positioned plumb, using a level for example. On many washing machines the feet rest on height-adjustable jacks to ensure optimum stability. It is also advisable to check that there is space between the machine, the walls and the furniture in the room.
These precautions regarding the installation environment make it possible to prevent a possible risk of overfilling or the formation of gas leaks.

Note: If the washing machine is installed in a bathroom, it is recommended to move it at least 60 centimeters away from the shower / bathtub.

The water inlet and outlet connections necessary for installing a washing machine

The water inlet hose is usually connected to a cold water tap, but some washing machines have cold and hot water inlets.

It is recommended to screw the water inlet nozzle of the washing machine to a tap and then open the tap to check the connection for leaks.
If necessary, silicone grease can be used to improve the tightness of the fitting.
If there is no tap nearby, it is still possible to install a self-piercing tap directly on a copper water pipe.
In this case, it is recommended to thoroughly clean the surface of the pipe where the valve will be installed to ensure that the connection is watertight.

Note: Some washing machine manufacturers offer variable-length hoses as an option.

The water discharge pipe of a washing machine is generally bent, this section acts as a siphon, it is to be inserted in a waste water drainage pipe. The angled section must be placed high and maintained to prevent possible leaks. If there is no drain pipe near the washing machine, it is still possible to install the water drain pipe in a sink or a bathtub.

Connect a washing machine to an electrical outlet when installing it

The washing machine must be plugged into a 16A grounded electrical outlet that is not already being used to power another appliance.

For safety reasons, it is necessary that the electrical outlet used is protected by a circuit breaker device at the level of the home electrical panel and that it be positioned at least one meter from a water source. You should also avoid using an extension cord to connect the washing machine to the electrical outlet and ensure that the latter is always accessible.

Note: Some washing machines must be switched on in order to allow their door to open; in this case, it is recommended not to use an automatic power cut-off device (remote-controlled socket, etc.).

The first commissioning of a washing machine after its installation

Before using for the first time, it is advisable to run an empty wash with a little detergent in order to clean the inside of the machine.

Once the installation is complete and the first vacuum washing has been carried out, it is possible to carry out the first washing cycle of clothes. Make sure you choose a program that is suitable for the laundry placed in the machine (you can refer to the labels on the clothes as well as the washing machine’s user manual) and that the amount of detergent placed in the machine is adjusted according to the degree of soiling of the clothes (you can consult the instructions on the packaging of the detergent on this subject).